Merge pull request #3 from matrix-org/human-id-rules

Proposal for human ID rules.

drafts/human-id-rules.rst

@@ -1,81 +1,132 @@
-This document outlines the format for human-readable IDs within matrix.
+Abstract
+========
 
-Overview
---------
-UTF-8 is quickly becoming the standard character encoding set on the web. As
-such, Matrix requires that all strings MUST be encoded as UTF-8. However,
+This document outlines the format for human-readable IDs within Matrix.
+
+Background
+----------
+UTF-8 is the dominant character encoding for Unicode on the web. However,
 using Unicode as the character set for human-readable IDs is troublesome. There
 are many different characters which appear identical to each other, but would
-identify different users. In addition, there are non-printable characters which
-cannot be rendered by the end-user. This opens up a security vulnerability with
+produce different IDs. In addition, there are non-printable characters which
+cannot be rendered by the end-user. This creates an opportunity for
 phishing/spoofing of IDs, commonly known as a homograph attack.
 
-Web browers encountered this problem when International Domain Names were
+Web browsers encountered this problem when International Domain Names were
 introduced. A variety of checks were put in place in order to protect users. If
 an address failed the check, the raw punycode would be displayed to
-disambiguate the address. Similar checks are performed by homeservers in
-Matrix. However, Matrix does not use punycode representations, and so does not
-show raw punycode on a failed check. Instead, homeservers must outright reject
-these misleading IDs.
-
-Types of human-readable IDs
----------------------------
-There are two main human-readable IDs in question:
-
-- Room aliases
-- User IDs
+disambiguate the address.
 
+The human-readable IDs in Matrix are Room Aliases and User IDs.
 Room aliases look like ``#localpart:domain``. These aliases point to opaque
-non human-readable room IDs. These pointers can change, so there is already an
-issue present with the same ID pointing to a different destination at a later
-date.
+non human-readable room IDs. These pointers can change to point at a different
+room ID at any time. User IDs look like ``@localpart:domain``. These represent
+actual end-users (there is no indirection).
 
-User IDs look like ``@localpart:domain``. These represent actual end-users, and
-unlike room aliases, there is no layer of indirection. This presents a much
-greater concern with homograph attacks.
+Proposal
+========
 
-Checks
-------
-- Similar to web browsers.
-- blacklisted chars (e.g. non-printable characters)
-- mix of language sets from 'preferred' language not allowed.
-- Language sets from CLDR dataset.
-- Treated in segments (localpart, domain)
-- Additional restrictions for ease of processing IDs.
+User IDs and Room Aliases MUST be Unicode as UTF-8. Checks are performed on
+these IDs by homeservers to protect users from phishing/spoofing attacks.
+These checks are:
 
-  - Room alias localparts MUST NOT have ``#`` or ``:``.
-  - User ID localparts MUST NOT have ``@`` or ``:``.
+User ID Localparts:
+ - MUST NOT contain a ``:`` or start with a ``@`` or ``.``
+ - MUST NOT contain one of the 107 blacklisted characters on this list:
+     http://kb.mozillazine.org/Network.IDN.blacklist_chars
+ - After stripping " 0-9, +, -, [, ], _, and the space character it MUST NOT
+   contain characters from >1 language, defined by the `exemplar characters`_
+   on http://cldr.unicode.org/
 
-Rejecting
----------
-- Homeservers MUST reject room aliases which do not pass the check, both on 
-  GETs and PUTs.
-- Homeservers MUST reject user ID localparts which do not pass the check, both
-  on creation and on events.
-- Any homeserver whose domain does not pass this check, MUST use their punycode
-  domain name instead of the IDN, to prevent other homeservers rejecting you.
-- Error code is ``M_FAILED_HUMAN_ID_CHECK``. (generic enough for both failing 
-  due to homograph attacks, and failing due to including ``:`` s, etc)
-- Error message MAY go into further information about which characters were
-  rejected and why.
-- Error message SHOULD contain a ``failed_keys`` key which contains an array
-  of strings which represent the keys which failed the check e.g::
+.. _exemplar characters: http://cldr.unicode.org/translation/characters#TOC-Exemplar-Characters
 
-    failed_keys: [ user_id, room_alias ]
+Room Alias Localparts:
+ - MUST NOT contain a ``:``
+ - MUST NOT contain one of the 107 blacklisted characters on this list:
+   http://kb.mozillazine.org/Network.IDN.blacklist_chars
+ - After stripping " 0-9, +, -, [, ], _, and the space character it MUST NOT
+   contain characters from >1 language, defined by the `exemplar characters`_
+   on http://cldr.unicode.org/
 
-Other considerations
---------------------
-- Basic security: Informational key on the event attached by HS to say "unsafe
+.. _exemplar characters: http://cldr.unicode.org/translation/characters#TOC-Exemplar-Characters
+
+In the event of a failed user ID check, well behaved homeservers MUST:
+ - Rewrite user IDs in the offending events to be punycode with an additional ``@``
+   prefix **before** delivering them to clients. There are no guarantees for
+   consistency between homeserver ID checking implementations. As a result, user
+   IDs MUST be sent in their *original* form over federation. This can be done in
+   a stateless manner as the punycode form has no information loss.
+
+In the event of a failed room alias check, well behaved homeservers MUST:
+ - Send an HTTP status code 400 with an ``errcode`` of ``M_FAILED_HUMAN_ID_CHECK``
+   to the client if the client is attempting to *create* this alias.
+ - Send an HTTP status code 400 with an ``errcode`` of ``M_FAILED_HUMAN_ID_CHECK``
+   to the client if the client is attempting to *join* a room via this alias.
+
+Examples::
+
+  @ebаy:domain.com (Cyrillic 'a', everything else English)
+  @@xn--eby-7cd:domain.com (Punycode with additional '@')
+
+Homeservers SHOULD NOT allow two user IDs that differ only by case. This
+SHOULD be applied based on the capitalisation rules in the CLDR dataset:
+http://cldr.unicode.org/
+
+This check SHOULD be applied when the user ID is created, in order to prevent
+registration with the same name and different capitalisations, e.g.
+``@foo:bar`` vs ``@Foo:bar`` vs ``@FOO:bar``. Homeservers MAY canonicalise
+the user ID to be completely lower-case if desired.
+
+Rationale
+=========
+
+Each ID is split into segments (localpart/domain) around the ``:``. For
+this reason, ``:`` is a reserved character and cannot be a localpart character.
+The 107 blacklisted characters are used to prevent non-printable characters and
+spaces from being used. The decision to ban characters from more than 1 language
+matches the behaviour of `Google Chrome for IDN handling`_. This is to protect
+against common homograph attacks such as ebаy.com (Cyrillic "a", rest is
+English). This would always result in a failed check. Even with this though
+there are limitations. For example, сахар is entirely Cyrillic, whereas caxap is
+entirely Latin.
+
+.. _Google Chrome for IDN handling: https://www.chromium.org/developers/design-documents/idn-in-google-chrome
+
+User ID localparts cannot start with ``@`` so that a namespace of localparts
+beginning with ``@`` can be created. This namespace is used for user IDs which
+fail the ID checks. A failed ID could look like ``@@xn--c1yn36f:domain.com``.
+
+If a user ID fails the check, the user ID on the event is renamed. This doesn't
+require extra work for clients, and users will see an odd user ID rather than a
+spoofed name. Renaming is done in order to protect users of a given HS, so if a
+malicious HS doesn't rename their IDs, it doesn't affect any other HS.
+
+Room aliases cannot be rewritten as punycode and sent to the HS the alias is
+referring to as the HS will not necessarily understand the rewritten alias.
+
+Other rejected solutions for failed checks
+------------------------------------------
+- Additional key: Informational key on the event attached by HS to say "unsafe
   ID". Problem: clients can just ignore it, and since it will appear only very
   rarely, easy to forget when implementing clients.
-- Moderate security: Requires client handshake. Forces clients to implement
+- Require client handshake: Forces clients to implement
   a check, else they cannot communicate with the misleading ID. However, this
   is extra overhead in both client implementations and round-trips.
-- High security: Outright rejection of the ID at the point of creation /
+- Reject event: Outright rejection of the ID at the point of creation /
   receiving event. Point of creation rejection is preferable to avoid the ID
   entering the system in the first place. However, malicious HSes can just
   allow the ID. Hence, other homeservers must reject them if they see them in
   events. Client never sees the problem ID, provided the HS is correctly
-  implemented.
-- High security decided; client doesn't need to worry about it, no additional
-  protocol complexity aside from rejection of an event.
+  implemented. However, it is difficult to ensure that ALL HSes will come to the
+  same conclusion (given the CLDR dataset does come out with new versions).
+
+Outstanding Problems
+====================
+
+Capitalisation
+--------------
+
+The capitalisation rules outlined above are nice but do not fully resolve issues
+where ``@alice:example.com`` tries to speak with ``@bob:domain.com`` using
+``@Bob:domain.com``. It is up to ``domain.com`` to map ``Bob`` to ``bob`` in
+a sensible way.