Previously, terminal reporters consulted `process.stdout.isTTY`. Now it
is possible to control the tty behavior:
- `PLAYWRIGHT_FORCE_TTY=0` or `PLAYWRIGHT_FORCE_TTY=false` to disable
TTY;
- `PLAYWRIGHT_FORCE_TTY=1` or `PLAYWRIGHT_FORCE_TTY=true` to enable TTY,
defaults to 100 columns when real columns are unavailable;
- `PLAYWRIGHT_FORCE_TTY=<number>` to force enable TTY and set the
columns.
Fixes#29422.
Previously, terminating worker always had a 30 seconds force exit.
Now, regular worker termination assumes that process will eventually
finish tearing down all the fixtures and exits. However, the
self-destruction routine keeps the 30 seconds timeout to avoid zombies.
Fixes#30504.
Implements feature requested in
https://github.com/microsoft/playwright/issues/30457
The test runner treats flaky tests as failures when the flag is enabled,
but still reports flaky tests as flaky in the reporting interface. It
feels like something worth discussing as this behaviour makes sense to
me, but looked a bit odd to @BJSS-russell-pollock when I ran this past
him.
Closes#30457.
Matching bu `apiName@wallTime` fails when two actions start at the same
time, e.g. two parallel api requests. Moreover, it results in trace
actions that have parent set to themselves, which in turn causes
infinite loop in the trace viewer. To avoid this problems we write
stepId explicitly to the library trace and use those step ids to find
corresponding test runner steps.
The stepId is passed via zone in case of expect, because the protocol
step is quite deep in the call chain after or explicitly in case of API
call steps created by the test runner instrumentation.
Pre Node.js `18.20.0`:
- `assert` is supported
Post Node.js `18.20.0`
- `assert` and `with` is supported.
Before https://github.com/microsoft/playwright/pull/30482 we kept
`asserts` in the JS code, Node.js was interpreting them. The `with`
keyword was not supported, this was what the PR was fixing.
After https://github.com/microsoft/playwright/pull/30482 Babel is
converting `assert` (deprecated) into `with` (successor) since we use
the `deprecatedAssertSyntax` option.
This means, that the minimum Node.js version we support in order to use
import attributes is now `18.20.0` where they added the `with` support.
This follows our principle of supporting only the latest minor release
for Node.js versions.
See here for the 18.20 changelog:
> #### Added support for import attributes
>
> Support has been added for import attributes, to replace the old
import
> assertions syntax. This will aid migration by making the new syntax
available
> across all currently supported Node.js release lines.
>
> This adds the `with` keyword which should be used in place of the
previous
> `assert` keyword, which will be removed in a future semver-major
Node.js
> release.
>
> For example,
>
> ```console
> import "foo" assert { ... }
> ```
>
> should be replaced with
>
> ```console
> import "foo" with { ... }
> ```
Fixes https://github.com/microsoft/playwright/pull/30482 - the tests
were a noop before, since they were tree-shaked by Babel.
Similarly to page.close, we pass test-runner specific reason to
facilitate better error messages.
```
1) a.test.ts:10:11 › test
Error: apiRequestContext.fetch: Fixture { request } from beforeAll cannot be reused in a test.
- Recommended fix: use a separate { request } in the test.
- Alternatively, manually create APIRequestContext in beforeAll and dispose it in afterAll.
See https://playwright.dev/docs/api-testing#sending-api-requests-from-ui-tests for more details.
9 |
10 | test('test', async () => {
> 11 | await context.fetch('http://example.com');
| ^
12 | });
13 |
```
Closes#29260.
* Use only monotonicTime for sorting, do not use wallTime for that
* Since test runner and the library can be running on different
machines, those machines may have clocks which are not synchronized. To
avoid problems in such cases we compute delta between test runner and
and library contexts based on a start time of action that exists in both
contexts.
When comparing `outputDir` and html-reporter `outputFolder`, we now make
sure that both paths end with a forward-slash.
Fixes#28677
---------
Co-authored-by: Georg Unterholzner <georg.unterholzner@dynatrace.com>
There are plenty of edge cases in this area:
- interrupted test run;
- did not run because of serial mode failure;
- failed before `test.skip()` call (e.g. in `beforeEach`) in one of the
retries;
- and more...
Related issues: #28322, #28321, #27455, #17652.
Prior changes: #27762, #26385, #28360, probably more.
There is still some duplication between `outcome()` and similar logic in
`base.ts`, which might be deduped in a follow-up.
Fixes#28322.
- Automatically waiting for the overlay locator to be hidden, with
`allowStayingVisible` opt-out.
- `times: 1` option.
- `removeLocatorHandler(locator, handler)` method.
- Passing `locator` as first argument to `handler`.
Fixes#30471. Fixes#30424. Fixes#29779.
Generate 'global timeout' and 'max failures' errors in the runner. Avoid
reading `config.globalTimeout` and `config.maxFailures` in the base
reporters.
Reference https://github.com/microsoft/playwright/issues/29768
There are new "non-manual" WPT accname tests that we now mostly pass,
which required a few tweeks in calculating role and name.
Also implemented accessible description computation, which is just a
small addition on top of accessible name, and passed respective wpt
tests.
References #18332.
Instead of filtering tests assuming there are no two projects with same
name we always rebuild test tree from scratch and restore previos test
results in the list mode.
Fixes https://github.com/microsoft/playwright/issues/30396
According to the spec, such controls should use the native value as long
as they have "aria-label". The relevant spec section is 2D.
However, there is an open issue that claims this should always apply,
and all browsers and wpt test actually do that:
https://github.com/w3c/accname/issues/64.
Fixes#28848.
The accessible name computation spec has changed to explicitly mention
this case:
Step 2A. Hidden Not Referenced. If the current node is hidden and is:
- Not part of an aria-labelledby or aria-describedby traversal, where
the node directly referenced by that relation was hidden.
- Nor part of a native host language text alternative element (e.g.
label in HTML) or attribute traversal, where the root of that traversal
was hidden.
See https://w3c.github.io/accname/#computation-steps. Chromium, Firefox
and Safari all agree with the spec.
Fixes#29796.
Repro: `cd tests/components/ct-svelte && rm -rf node_modules
package-lock.json && npm i && npx playwright test --project=chromium`
Follow-up based on
https://github.com/microsoft/playwright/pull/28624#issuecomment-1858608101.
Svelte has no router by default, only SvelteKit - so lets remove the
package which is not maintained anymore and not recommended.
* FullConfig split into FullConfig and ConfigInWorker
* FullProject split into FullProject and ProjectInWorker
* Tests can only access {Config, Project}InWorker, while reporters can
only access Full{Config,Project}. This will allow in the future to
change the reporter API independently from the tests.
* Added documentation for the 4 classes.
When websocket disconnects during `browserType.connect()` call, the
error looks like this now:
```
browserType.connect: Custom error message received over WebSocket
```
Previously, it was a generic error:
```
browserType.connect: Target page, context or browser has been closed
```
Fixes#30040
# Context
In the `playwright.config` file, we can custom the default `timeout`
property for `expect.toPass` by the property:
```ts title='playwright.config.ts'
export default defineConfig({
// ...
expect: {
toPass: {
timeout: 60_000,
},
},
});
```
However, we can't customize the `intervals` option. So the default value
is always `[100, 250, 500, 1000]`.
# Goal
Add the possibility to customize the intervals option from the
`playwright.config` file.
```ts title='playwright.config.ts'
export default defineConfig({
// ...
expect: {
toPass: {
timeout: 60_000,
intervals: [1000, 2000, 3000]
},
},
});
```
* Add `Suite.entries` that returns tests and suites in their declaration
order
* Exposed `Suite.type` and `TestCase.type` for discriminating between
different entry types.
* Blob report format is updated to store entries instead of separate
lists for suites and tests.
* Bumped blob format version to 2, added modernizer.
Fixes https://github.com/microsoft/playwright/issues/29984
